Care and maintenance
All Cut By Cut products are made from carefully selected woods such as oak, ash, walnut and teak and are made to last for many years. With the right care, the wood retains its luster and durability.
Here you’ll find our professional tips for daily care, oiling and installation – based on the precise methods and materials we use in our own carpentry workshop.
The Advantages of Wood
Wood is a living, organic material that brings an incomparable warmth, authentic character, and natural durability into the home. Its timeless beauty is made to last for generations—and often only grows more beautiful as the years pass.
A Unique, Natural Beauty
Every wood species has its own unique character. From the light, elegant grain of ash to the deep, luxurious glow of walnut and teak, each piece possesses distinct, natural figuring. It is this honesty in the material that gives every Cut By Cut product an exclusive and timeless finish, fitting perfectly into any conscious home.
Robust and Form-Stable Craftsmanship
We exclusively select the finest, FSC-certified hardwoods such as oak, ash, walnut, and teak. Their natural strength and high density make them extremely resilient to everyday use. Our precise craftsmanship, combined with the robustness of the wood, ensures form-stable designs that are created to last for generations.
Precision in Every Cut
Our selected wood species are ideal for the precision processing that defines Cut By Cut. This is what allows us to create the sharp lines and silky-smooth surfaces central to our designs. The result is a product with an exceptional tactile quality and perfect details, made to age with grace.
Wood lives and changes over time – and therefore needs a little attention.
Here you will find simple advice on daily care of your Noyer products and how to refresh them when they start to look dry or dull.
Wood products
Daily care
It doesn’t take much to keep your Cut By Cut products looking good every day.
With the right care, you can prevent the wood from drying out and preserve its beautiful surface for many years to come.
How do I clean my product on a daily basis?
Use a lightly dampened cloth—with a bit of mild soap if necessary—and always wipe dry with a clean, dry cloth afterward. This applies to all our wood products.
Can I use cleaning products?
Only use a mild soap solution when it is truly necessary. Harsh detergents or strong cleaners can dissolve the protective oils in the wood, leaving the surface looking dull or greyish. In worst case, they can dry out the wood, causing it to crack or warp.
Should I be concerned about water?
Wood does not tolerate being wet for extended periods. Therefore, always wipe the surface completely dry with a clean cloth, and never allow water to pool or sit on the surface.
How do I avoid stains and marks?
Always wipe up spills immediately—especially if it is a liquid like oil, coffee, or red wine. Ensure the surface does not remain damp, as moisture can penetrate the wood grain and cause permanent stains or watermarks. Use a dry cloth to wipe the area, and never let liquids stand on the wood.
What should I do if the wood looks dull or dry?
Then it may be time for an oil treatment. We will explain more about this in the next section about oil treatment.
Maintenance and Oil Treatment
Over time, all wood can begin to look dry or dull—especially if it is used often or placed in direct sunlight. Fortunately, it is easy to refresh the wood’s natural glow with a bit of oil. Here, we explain how to do it and what you need to be aware of.
How often does it need oil?
That depends on the product and its use. Cutting boards, for example, will require oil more frequently than shelves or tables. If the wood feels dry to the touch or has taken on a “greyish” appearance, it is time. However, most products will not need a new oil treatment for many years. If you are in doubt, you can always contact us.
How do I apply the oil?
Apply a thin layer of oil with a soft cloth, distributing it evenly over the entire surface. Let the oil soak in for 10–20 minutes, and then wipe the surface thoroughly with a clean, dry cloth (an old t-shirt is perfect for this). It is critical that no excess oil is left on the surface, as this can dry into a sticky or “gummy” finish. We recommend wearing gloves and working in an area where a small spill won’t be a problem.
CRITICAL SAFETY WARNING: RISK OF FIRE
Cloths, rags, or paper towels soaked in oil can catch fire as they dry if not handled correctly.
NEVER bunch up an oily cloth and throw it in the bin or leave it in a pile.
ALWAYS dispose of used cloths safely. You must either:
Lay the cloth out flat on a non-flammable surface (like concrete or gravel) outdoors to dry completely until it is stiff, OR
Soak the cloth completely in water and seal it in a metal can or glass jar with a lid before disposing of it.
What kind of oil should I use?
We recommend using the same oil we use in our own workshop: a food-safe, high-quality oil that provides the right treatment and protects the wood for the long term. If you need oil or have questions, please contact us for recommendations.
Can I wipe off too much oil?
No, you cannot remove too much. The wood will absorb the oil it needs—the rest must be wiped away. It is far more important to wipe off all the excess oil than to leave any behind. A surface that feels dry to the touch is a sign that the wood has absorbed what it can.
What happens if I don't wipe it all off?
Excess oil will create a greasy or sticky surface that is very difficult to repair. Therefore, always ensure you wipe the surface completely dry after the oil has soaked in.
Do you have more questions that weren’t answered here?
We’ve gathered the most frequently asked questions in one place so you can quickly find the answers.
Frequently asked questions
Be inspired
